Nexiq usb link work with Service Advisor software

But finally I got  Nexiq usb link to work with Service Advisor software
Here is how to operate…
First, you must reflash your Nexiq with John Deere EDL firmware. When you do that, you\ll got EDL as connected device in device manager.
Find original firmware and save it (backup)
C:\NEXIQ\RP1210A\usblink.bin
In John Deere Service Advisor find EDL.bin
I do not remember where it location …
Copy and rename EDL.bin to usblink.bin
replace original C:\NEXIQ\RP1210A\usblink.bin
Go to C:\NEXIQ\Test
open binload.exe
check checkbox – Enable automatic USB-Link firmware update
open CommCheck.exe
firmware will be update
and Nexiq name will be changed – now EDL-Link
Please take a note, that firmware reflash is possible only with original nexiq or HQ nexiq clone, LQ clones can’t be reflashed, even with newer nexiq firmware
It depends on what clone you have, my clone get all updates,works with OBD volvo,and have no issue.
Second, you must modify standard Nexiq 9 pin deutsch cable. just simply revert positions of CAN lines.

Sales auto-diagnosis.org