Question: FoxFlash read Opel Delco E98 ID and Flash without problem but app crashed when reading EEPROM and Backup. So, is FoxFlash Tool possible to work on the real challenge Delco E98? Yes, Flash+ EEPROM read/write. Here are some… Continue Reading
One customer had a problem with BMW EDC17CP02 CP06 on bench. With every pin connected and bench box powered, FoxFlash Hardware can’t read. Here Cardiagtool tech shares the Solution: 1.Repin ECU with alternate pinout(2 types) 2.Switch off MFC until commanded… Continue Reading
Purpose: Can PCMtuner Tool read/ write Delphi CRD3XX, or other tools you would recommend. 1.PCMtuner CRD3 is not on the support list, but it can be done in Module 53 Tricore BSL to read micro and EEPROM. CRD3.10 and CRD3P… Continue Reading
Question: Is it possible to fix this FoxFlash? I gave power to the programmer from both sides to make it damaged, and now it has no communication with the laptop Regards There is no visible damage on the board. Here… Continue Reading
Question: GPEC2 ecu in boot, double checked my pin out and the CNF1 with testing but can’t read. Using bench box then remove, in both ways same result. I just think it is locked ecu 2015 plus. Possible for FoxFlash… Continue Reading
Is FoxFlash possible to read EDC17CP54? One customer gave feedback that his FoxFlash can’t read it. Besides, all cable connection is fine he had checked. Here is the Solution: 1.Pin 50 on the central row +12v Not pin 33 +12V… Continue Reading
One customer gave feedback: FoxFlash did not read PSA Mev17.4 on Bench, with 12v and 13.5v. If MEV17.4 TC1766 Peugeot could be read with PCMtuner? Answer: Both work but there are 3 possible pinouts. Confirm the wires of terminals are… Continue Reading
Question: SID309 OBD password unlock stop at 57%. Waited for 20 minutes and nothing was happening. How to make FoxFlash Software continue? Here Cardiagtool tech Answer: When reading password via OBD (IN CAR) please ensure immo system does not become… Continue Reading
Question: Can FoxFlash read/ write gpec2? Here Cardiagtool tech Answer: FoxFlash Software support GPEC2A, GPEC3, GPEC4, GPEC4LM but not GPEC2. Here is all supported GPEC PCM: Brand vehicle Model vehicle Engine/gear type ECU Brand ECU Type Info Micro Info EEPROM… Continue Reading
The latest V1.3.0 FoxFlash Manager could support up to 6 computers, which allows you run FoxFlash software on different computers without activation. If you still don’t know how to install and activate FoxFlash, please check: Free Download FoxFlash Software… Continue Reading
