How to Add Key for BMW G-Series BDC2 by ACDP Module 38?

Yanhua ACDP Module 38 is designed for adding keys for BMW G-Series BDC2.

In this article, we are going to show you how this adapter works with ACDP.

Step-by-step Guidance:

Run ACDP app on phone.

Connect ACDP Tool to app.

Select

BMW>>FEM/BDC>>IMMO/Mileage>>BDC ICP+OBD (F/G Chassis)

Select ‘Identify car info’.

ACDP will add keys for this car.

Select ‘Obtain key data’.

Remove BDC2 unit.

Select ‘Help’ beside ‘Step 1: Read coding data’.

Check out diagrams and connect ACDP Module 38 to BDC2 unit.

Select ‘Step 1: Read coding data’.

Save coding data.

Select ‘Step 2: Read key data’.

Select ‘Step 3: Write coding data’.

Load coding data.

Select

Add key>>Method 1: BENCH

Load key data.

Connect ACDP to key adapter and put in original key.

Put in new key.

Select key position.

Install back BDC2 unit.

Take original key 3 meters away from car.

Put new key close to ignition and hold down ignition switch for 15 seconds to learn new key.

Done! That’s how to use Yanhua ACDP Module 38.

Skype: cardiag.co.uk