BMW Coding Programming Cost Only $12

It’s aimed to help BMW owners to use low cost (12 dollars) to diagnose, coding or programming cars, especially for BMW E series and F series.

BMW Ex Series Cable

For BMW Ex Series you need a K+DCAN BMW coding cable (You will find many cables online, just make sure to ask the seller if the cable will be compatible to your car. This is important only for Ex series coding because newer cars (2008 and up) will need a more expensive cable, not the cheapest) It`s usually a white transparent cable.

 

NOTE: Warning for bad K+DCAN cable!!!

http://blog.worldobd2.com/2015/11/05/warning-for-bad-kdcan-cable/

 

The best cable for Ex series tested by many people is sold at worldobd2.com, it`s a bit on the expensive side but it`s worth it 100%.

 

INPA driver & software free download:

INPA Driver: http://www.chinaautodiag.com/download/inpa-driver.zip

INPA software: http://www.chinaautodiag.com/download/inpa-2.zip

（Close antivirus software or set your browser to download success）

 

With k+dcan cable , you can:

1. Read and delete faults
   2. Adaptations
   3. Driver programming
   4. Applu coding
   …

 

This cable support models (-2007):

E60, E61 old 03/2007
E83 od 09/2006
E81, E87 old 03/2007
E90, E91, E92, E93 od 03/2007
E70 (new model X5)
R56 (new model MINI)

 

Guide: how to setup K+dcan Rheingold INPA:

http://obd2-diag.blogspot.com/2016/04/how-to-setup-inpa-kdcan-cable-icom.html

 

 

BMW Fx Series Cable

 

For Fx Series coding you need a ENET cable. You don`t have to buy the most expensive one, all ENET cables are the same so it`s simple to get the right cable.

 

 

ENET coding cable support:

new 1 Series, 3 Series, 5 Series, 7 Series , GT, X3

 

With this cable, you can:

hide modules or program single module

e.g.

1. Lock unlock sound confirmation
2. Can operate the navigation menu including watching dvd when driving
3. Display engine output and torque meter
4. Cancel confirmation screen big screen boot delay
5. Open the voice recognition function
6. Three kind of bluetooth phone ringtones
7. Disable the seat belt status display – passenger/driver seat
8. Disable seat belt reminder (mistake)

…

And for more functions to know, please go to
http://www.worldobd2.com/wholesale/enet-esys-icom-coding.html

 

Guide: installing, setting up Esys and psdzdata for BMW F series cars plus also coding how to`s:

http://bmw-f-coding.blogspot.com/