BMW Diagnostic Tool
More and more users give good feedback on GODIAG V600-BM BMW diagnostic and programming tool. Some tested better than ICOM Next, some tested diagnose BMW on bench, some tested it can access all systems etc. Review 1: better than ICOM… Continue Reading
Godiag V600 BMW diagnostic and programming tool, problem connect to ISTA D. How to Solve? Answer: So far, godiag v600 supports network cable and wifi connection (wifi password: 12345678), USB cable is not allowed. Please open the IToolRadar software, and… Continue Reading
When programmed BMW F32 by BMW ICOM NEXT A+B+C, always got error reading “Vehicle programming with ISTA/P is no longer approved for the connected vehicle. Vehicle management is now only possible with ISTA4. Please observe the release notes!” Solution offered by… Continue Reading
Steps to re-adapt BMW engine with BMW ISTA-D or ISTA+ software: (Rheingold is the old name of ISTA/D. After version 4, it was called ISTA+ and also has the ability to program F and G cars without ISTA/P. ISTA/P is legacy now for… Continue Reading
Confirmed! CGDI prog BMW key programmer can diagnose Mini Cooper 2016 without issues. Preparation: Car: 2016 BMW Mini Cooper R60 Chassis: E Series Immobilizer: CAS3+ Device: CGDI prog BMW Test: The vehicle connects the OBD wire harness Open the car ACC button Connect… Continue Reading
VXDIAG VCX SE for BMW installation guide, coverage, diagnostic and programming test results. Generally speaking, it is worth owning one. VXDIAG VCX SE for BMW software installation tips: The packed CD is contained with the driver, if you have… Continue Reading
I’d like to answer the questions for you guys: “Possible to read and write 35160WT with VVDI Prog” Tried with Vvdi programmer to reset eeprom chips on bmw clusters / odometers But no matter how I try I can’t read ANY eprom… Continue Reading
If you face ISTA-P 3.60.2.001 error 94201 63031 /63014, here is a solution from eobdtool.co.uk 10 steps help you to solve ISTA-P 3.60.2.001 error 94201 63031 /63014 after boot. End the dialogue. Disconnect ICOM device from the BMW. unplug the… Continue Reading
CGDI Prog BMW MSV80 key programmer is able to update firmware and software on the official site: www.cgprogcar.com. Below parts incl. CGDI Prog Firmware and software update instruction. Part 1: 5 steps to update CGDI Prog Firmware Step 1.… Continue Reading
After BMW explorer, both VVDI2 4.3.0 with FEM & BDC key programming function & Yanhua FEM key programmer are the most reliable tools if you have BMW cars with FEM to program key. Let’s one -by -one introduce them. … Continue Reading
