One customer asked how to immo off M3.8.3 VAG ECU since he never desolders before, m3.8.3 golf ecu need immo off. Here is the manual solution to immo off: 1)Eeprom 24C02 2)Desolder and read with any programmer (You may choose… Continue Reading
Quick Question: How to fix “Try frequency failed (00)” error when VVDI PROG with Xhorse MQB Adapter reads dashboard data? Tried test function and mqb option, all failed but if I solder cables using MCU cable in the package, VVDI… Continue Reading
Quick Question: What is new on Xhorse Multi Prog than old VVDI PROG? Here we will answer you. Multi Prog vs. VVDI PROG: Multi Prog VVDI PROG Read/Write/Clone ECU √ √ Read/Write/Clone TCU √ × Read/Write MCU √ √… Continue Reading
What tools to repair Porsche 12V Lithium Battery? Here we will introduce 3 tools. We will cover CG100X, ACDP, and VVDI. 1.CGDI CG100X As the upgraded version of CGDI CG100, it support battery repair for Cayenne from 2017-2020 (SPC5644B)… Continue Reading
Xhorse VW MQB48 Function is available now as the latest software of V7.3.1 VVDI2/ V5.2.5 VVDI PROG/ VVDI Key Tool Plus is ready. Here we will share pinouts, free software download and the chip type it supports. Free Download Software:… Continue Reading
New Xhorse MQB48 License is released, which allows VVDI PROG/MINI PROG to read VW MQB48 immobilizer data via dash chip. Almost all NEC35XX chips (VDO/JCI) are supported. Here we will show you a step-by-step guide and the tools we should… Continue Reading
V3.8.0 VVDI PROG Programmer has been released by WOBD2. Here is the introduction for the new VVDI PRO V3.8.0. What’s new for v3.8 vvdi prog? * This version DON’T need update firmware + Add 2L33V, 3L15Y R/W function (The only… Continue Reading