Auto Diagnostic Tool
Problem Description A customer reported that the VNCI 6154A (SP447) could not communicate with the diagnostic software after a firmware update. The customer had tested different firmware versions, including V1.2.0.2 and V1.1.8.5, but neither version worked correctly. Possible Cause The… Continue Reading
With so many diagnostic tools available on the market, choosing the right OBD2 scanner with ECU coding capabilities can be challenging. A professional scanner should offer more than just basic fault code reading. Nowadays, advanced functions such as ECU coding,… Continue Reading
Recently, a customer reported that their VXDIAG VCX SE 6154 interface could not communicate properly after installing ODIS V25 and ODIS V18. Although the device appeared to be recognized by the computer, ODIS was unable to establish a normal diagnostic… Continue Reading
In this guide, we’ll demonstrate how to read Diagnostic Trouble Codes (DTCs) and access live data streams on a 2021 Genlyon C6 using LAUNCH X-431 PAD V ELITE. Device Used LAUNCH X431 PAD 5 LINK HD Vehicle Tested 2021 Genlyon… Continue Reading
A customer recently asked me a question about YH35XX Programmer: I’m sure my chip connection method is correct, but the device displays the message “The chip was not detected, please check that the chip is connected!” Reply from CARDIAGTOOL UK… Continue Reading
If you’re experiencing issues with your LAUNCH X-431 diagnostic tablet (such as app crashes, connection problems, or software glitches), collecting and uploading application logs is essential for efficient troubleshooting. Follow this step-by-step guide to enable log collection and submit logs… Continue Reading
Launch CANFD Cable allows Launch CRP919 BT to diagnose CANFD protocol cars. This cable also works with other Launch Creader Series Tablets. Here we will show you how. Guide: Disconnect CANFD cable. Connect it to OBD cable and port.… Continue Reading
Launch X431 has many diagnostic tablets, and they support different optional modules such as X-PROG3 Programmer, Launch X431 Key Programmer, and S2-2 sensorbox. So, is there a support list? Here we will show you. Launch X431 Add-on Support List: X431… Continue Reading
Launch has a wide range of tools, and some have similar functions. Here we are going to show you the difference between two Launch tools, Launch X431 Pro Elite and Launch X431 Pro3S+ Elite. Differences Visually, you will see PRO… Continue Reading
How is topology important on car diagnostics? What is it most useful for? Here we are going to show you how Topology Mapping System will help in car diagnostics. Vehicle: Mercedes 2022 C300 Tool: Topdon Phoenix Plus What… Continue Reading
