This article is a guide on how to install and activate New KT200 (ktmtool) software. 1.Download Go to https://www.ktmtool.com/. Input Email address and phone number to download software package. Unzip package, click to install software. Then we will have… Continue Reading
Here is a review of R/W VAG Simos18.1 successfully: Simos 18.1 VAG KT200 Yes! Don’t forget the power supply 13,5v DC and it works perfect. Car: Vag Golf7 Performance 2.0 GTI 230Hp ECU: Simos 18.1 SAK TC1791, Mod Stage1 301Hp… Continue Reading
Question: New V12.10 KT200 software doesn’t show ECU info when selecting protocol driver. Here Cardiagtool tech shares the Solution: Download “auto.txt” file, and put it into “KT200-master” folder. (Click to Download File) Review from Giovanni Sutera: Before: Solved! Hope… Continue Reading
V2022.12.10 KT200 Software is available now! SID310 in OBD mode is added and more updates are coming. Free Download V12.10 KT200 Software: V2022.12.10 KT200 How to Install? Unzip it into the C:\KT200-master folder and overwrite the file OS: Windows 7,… Continue Reading
Question: Possible to read SID307? I have KT200 and PCMtuner. Answer: Both work. KT200 support Dacia/Mercedes/Nissan/Renault SID307 by Boot mode; PCMtuner support Renault/ Nissan by OBD mode. 1.PCMtuner V1.27 Module 25 Renault/Nissan 1.5dCi 1.5L dCi Delphi DCM 1.2 (ST10/512KB) 1.5L… Continue Reading
One customer wondered if KT200 Programmer can read/ write PSA DCM6.2A in bank? Or can only do it in OBD Answer: On Bench/ OBD on Bench/ Jtag BDM. Method 1.On Bench PIN2&3&52 – +12V PIN4&5 – GND PIN33 –… Continue Reading
One user gave feedback that his KT200 Full License showed ERROR SET2 when reading PSA EDC16C3. Here Cardiagtool tech gave the Solution: Remove the resistor, which is built into the bench box. Same connection only the resistor is not required.… Continue Reading
One customer wonder if KT200 Tool could read calculator Sim32 Clio 3 1.2 on the table by obd with godiag cable? Answer: Test, if not work, do gateway/ immo clearance. KT200 only support SIM32 on BDM/ JTAG mode. … Continue Reading
One customer wonders if it’s possible to read that ecu since its KT200 can’t read it. Valeo VD46. Answer: VD46 is different from V46, the processor is SH725 and no driver supports. Difference between VD46 and V46: 1.VD46… Continue Reading
KT200 Master Tool Read and Write VW EDC 16U1 Eeprom Tutorials: Firstly: Connec KT200 ecu programmer with VW EDC 16U1 ECU and computer, make the ECU Power is on. Click KT200 software on the laptop, click select driver, choose Volkswagen-MPC555/6-VAG-EDC16U1… Continue Reading
