Alientech KESS3 2.26 update info: Read, write, and clone in BOOT mode* the Continental SIM2K-142, SIM2K-143, and SIM2K-245 ECUs and TCUs, installed on 2.0 MPi and 2.4 MPi engines. This is an effective solution for professionals who work daily on… Continue Reading
Alientech KESS3 V2.25 now supports ZF8HP45 TCU and Temic DL501 GEN II gearboxes. Operate in BENCH mode—no need to open the control unit—on ZF gearboxes installed in Jaguar vehicles with 2.0d and 3.0d engines, managed by the Bosch ZF8HP45 TCU.… Continue Reading
Alientech KESS3 V2.23 now updates OBD VR Protocol for Bosch MD1CP004. Make sure KESS3 CAR LCV OBD Protocol is activated on your tools. Update Info: This update completes the existing BENCH coverage available on KESS3, offering an even more immediate… Continue Reading
Alientech KESS3 V2.22 now updates BOOT protocols for Weichai and Kubota. Update Info: Work in BOOT mode*, operating with the ECU open, on the Weichai ECU13 WISE15 units used in the 3.2L Weichai engines installed on the 2022 Dongfeng LX2004… Continue Reading
TCU PDK3000 and PDK4000 now are added into Alientech KESS3 V2.20. Work precisely on the PDK transmission of Porsche sports models: access the Continental PDK3000 and PDK4000 TCUs via BOOT mode, read, write, and clone the ECU content with total… Continue Reading
More TCU units are added into Alientech KESS3 V2.19. Connect via BENCH mode, directly from the TCU connector, and work safely on three of the most widespread transmissions in the European market: the 8-speed ZF automatic transmission used on Audi… Continue Reading
Alientech KESS3 V2.18 software is released! You can now work on an even wider range of Continental ECUs – EMS3141, EMS3140, and EMS3161 – installed on petrol engines from the Renault/Nissan group, from 2016 to the latest 2025 models. With… Continue Reading
New Alientech KESS3 V2.17 supports MD1CS004 ECUs with hardware H80 can only be managed via OBD. This KESS3 OBD Protocol for Bosch MD1CS004 allows workshops to efficiently work on vehicles produced from 2019 to 2025, opening up new opportunities on… Continue Reading
Alientech KESS3 V2.16 now supports Marelli IAW 11MP, Mitsubishi BB5-8591A-XX, Mitsubishi BDW-86510-XX, Mitsubishi 32920-42FX0, and Denso 32920-13K00. Discover the world of two-wheel tuning and bring innovation to your workshop with KESS3 BIKE – BENCH/BOOT Protocols. New ECUs: ECU –… Continue Reading
Alientech KESS3 V2.15 is available! New updates includes Delphi DCM2.7AP OBD Mode and more! Innovate your workshop with KESS3 and fully exploit KESS3 TRUCK/TRACTOR – OBD Protocol and KESS3 TRUCK/TRACTOR — BENCH/BOOT protocols. New ECUs: ECU – BENCH/BOOT Denso… Continue Reading
