ISPI Admin Client is used for ISPI-NEXT authorization management and environment Configuration software. But some users explain ISPI Admin Client error ILAC-0007 they meet when they use BMW ICOM A2 diagnostic tool. Here is a useful solution shared at a forum. Put it here for sharing.… Continue Reading
This is the instruction on how to change vehicle order (VO) with NCS Expert, on BMW vehicles except F series.
when BMW ICOM A2 SSD/ HDD plug into the computer and Windows prompts error “The sceen resolution is insufficient to run this application”.
What to do if BMW A2 ISTA/P ISPI Next has expired, or could not be started or closed? Here’s the useful solution offered by wobd2.
It’s all about update INPA for new chassis model, with K+DCAN cable or ICOM A2. Instruction: 1. Find out which control modules are fitted to that new chassis. 2. Locate the correct *.prg files for those modules. 3. Locate the… Continue Reading
Symptom: BMW diagnostic mux ICOM A2 System LED stays red and flashes/blink always. No problem exists after self-test and firmware update. Solution 1: 1)-rehot hot aır gun thıs ıc .. 2)-ıf no, replace or change new one .. 3)-problem that… Continue Reading
I have a 2014 M5 and flashed the car, the junction box and a bunch of other modules too, with ISTA/P 2.52.4 and an BMW ICOM clone A2 from www.worldobd2.com. It was the fourth or fifth car that I had… Continue Reading
I have a BMW ICOM clone and trying to connect to my BMW E46 with ista D, but it says it can’t read out vehicle order or VIN. Here I offer two solutions, just for sharing. Error: the vehicle could… Continue Reading
July, 2015 update: To run newest ISTA-D Rheingold 3.49.30ISTA-P 55.4.000 on BMW ICOM A2/A1, you need to update firmware to the newest version Current SYSTEM IMAGE version: 01.24.00 Current APPLICATION IMAGE version: 01.38.01 There are some ICOM hardware distinguished by… Continue Reading
While coding my car today (just normal feature like disable disclaimer, enable acoustic sound when lock/unlock, remember last air con setting, roll windows when opening, mirror fold with lock, etc… Suddenly it start giving me error: Refueling possible, and sometimes… Continue Reading
My 2006 325xi occasionally going into transmission limp mode, then fixed by dealer, but RAD2 crashed and I was told I needed to replace a RAD2 for $830, then I post my issue on the BMW forum, finally I got… Continue Reading