OBDSTAR MQB RH850/V850 Adapter will work with OBDSTAR G3 to program keys for VW MQB48-5A, Ford/ Lincoln 2021-, Nissan/ Renault and FCA. Here we are going to show you its functions. Steps: *Download VW 45.47 that will be available… Continue Reading
OBDSTAR RH850 Adapter Kit for VW MQB AKL programming is coming! This kit can work with OBDSTAR G3 on Airbag Reset, IMMO Data, and Pincode Read (Dashboard, BCM, ELV). 1.Adapter Kit List 1)C4-06 2)W010 3)W010A 4)C4-06-C01 5)C4-06-C02 6)Dedicated decryption jumper… Continue Reading
New Yanhua ACDP VW MQB YH-OBD Platform will repair km of VW MQB R7F701404/ 01406. With this new platform, you don’t have to install the cluster back to vehicle for odometer correction. Here is how to use it. How to… Continue Reading
CGDI CG100X V1.7.4.0 is now available! It adds RH850 Decryption R7F7010643 Read Write and more. Free Download V1.7.4.0 CG100X Software V1.7.4.0 CG100X V1.7.4.0 CG100X Update Info (02-22-2025) 1.Add 26 models to dashboard 2.Add 2 models to airbag 3.Add 2… Continue Reading
Question: Tried to read the cluster with GODIAG GT110 via VVDI Key Tool Plus, during the process, the part completely went off, now it doesn’t work anymore, also not on the vehicle, what could be broken, it’s not burned or… Continue Reading
Sometimes it is very easy to read eeprom from VAG CAN-BUS UDS dashboard using a pogo pin. So, here we share 2 commonly used test platforms for you. 1.Godiag GT110 Test Platform with Pogo Pin for VAG CAN-BUS UDS… Continue Reading
Dear Autel Customer: We are excited to announce the release of the VAG SFD function on Autel Diagnostic Devices, available from 28th October 2024. This powerful new feature will significantly help you diagnose new VAG vehicles. Support List Vehicles Model… Continue Reading
DIY Scanner with built-in CANFD and DoIP protocol, VXDIAG VCX CANFD or TOPDON Rlink X7 Users can add various OEM software to VXDIAG hardware, but TOPDON now release 2 editions for GM and VW with more coming next month. What… Continue Reading
Quick Question: Cloned a Simos 8.51 module ( 2013 Audi A8 ctub) with the Launch X431 Xprog3? I had successfully backed up the eeprom and flash from the original ECU and loaded it into the donor but the vehicle does… Continue Reading
In this article we are going to show you how to repair a VW Scirocco using Launch X431 Scanner. (You can use your X431 PAD VII/ PAD V/ PRO5…) Scan the car, DTC “00778” cannot be clear, and sensor is… Continue Reading
