Here is a review of OBDSTAR DC706 ECU Tool: Chevy Cruze >> SIMTEC76.1 ECU info Bench mode connect for R&W flash not working Adapter Supply 14&15 V Boot Mode working Let’s check out how it is done. Read ECU… Continue Reading
Purpose: Recover an Opel E98. Steps: We tried writing the ECU with Xhorse but it failed, so we will use OBDSTAR DC706. All the way straight to E98 menu. As we can see, we need two 100ohm resistors and set… Continue Reading
OBDSTAR DC706 ECU Tool July 2024 Update is ready! New version adds Mercedes SIEMENS/CONTINENTAL VGS2-NAG2 VGS3-NAG2 Erase. Update Info: ECU Clone 1.ECM V30.96 Details Optimized Optimized software. 2.TCM V30.37 Details Added Add Read/Write EXT flash functions for below models:… Continue Reading
Confirmed: OBDSTAR DC706 would read CS and PIN code by IMMO Data Decryption. Here comes a review of DC706 pulling immo data from VW Jetta. Read eeprom and flash on a 2011 VW Jetta ME17.5.6. Then used the immo… Continue Reading
One customer asked if the OBDSTAR DC706 6l80 pinout is wrong because it is different than the diagram on websites including Alldata? Is this a misprint? There are new types of ECU with different diagram. Check out possible pinouts… Continue Reading
In this article, we will show you how to clone JEEP Continental GPEC2 using OBDSTAR DC706 with MP001 Adapter. Step-by-step Instructions: Turn on DC706, Select ECU Flasher>>ECM>>ECM V30.70 Search for “Chrysler Continental GPEC2A”. Read instructions before operation. Complete connection by… Continue Reading
One customer asked if the Part number and Service Number need to match exactly since he had some GM ECM to clone using OBDSTAR DC706. His 2 E39 have different service and part numbers. All have matching engines. Just different… Continue Reading
One customer wonders the way to connect OBDSTAR DC706 to GPEC3 module. The DC706 diagram required three red 12V cables but he only got two in P004 Adapter Kit. Here is the way: Add the other cable to either of… Continue Reading
