V1.2.3.0 CGDI FC200 ECU Programmer is released! New version adds odometer function for MED17.5.25 ME17.5.22 MED17.1.27! Check out full details below! Software Download: V1.2.3.0 CGDI FC200 CGDI FC200 Update Info (2024-10-19): Added FC200 device binding function, after binding, you… Continue Reading
Which is the best ECU programmer under 1,000EUR, VVDI Multi Prog or CGDI FC200? In this article, we will show you their difference. And we will only focus on ECU and TCU difference. 1.CG FC200 PROS: ECU VAG: Simos 8.1/… Continue Reading
In the market, we’ve got a lot of ECU tuning tools for us to choose. So, which one is the best? Check out their difference. 1.Alitentech Kess V3 Kess3 is from Alientech, it’s an Italian company. They were doing… Continue Reading
V1.1.7.0 CG FC200 Software is released! It adds Volvo EV ECU and Hyundai TCU/ECU. Free Download CG FC200 Software: V1.1.7.0 CG FC200 V1.1.7.0 FC200 Update Info: 1.Add Volvo Electric Equipment ECU: MB279700-9500, MB279700-9801, MB279700-9811 2.Add Audi ECU: Simos8.4x, Simos12.x… Continue Reading
Which is the best tool to read MSD85 series ISN? Is a ECU Programmer a must-have tool? Here we will show you 4 tools to read MSD85 ISN. 1.Autel Trying to read ISN for this MSD85.1 DME however the only… Continue Reading
V1.1.6.0 CG FC200 Software is released with more GPEC series and gearboxes added! Get the free download link from Cardiagtool. Fre Download CG FC200 Software: V1.1.6.0 CG FC200 V1.1.6.0 FC200 Update Info: 1.Added CONTINENTAL TC17 type engine computers (BOOT… Continue Reading
V1.1.5.0 CG FC200 now supports full Bosch EDC16 & EDC17. Get the latest software from Cardiagtool. Free Download CG FC200 Software: V1.1.5.0 CG FC200 V1.1.5.0 Update Info: 1.New platform mode engine for Bosch MPC5xx class: (Note: Require MPC5xx Adapter)… Continue Reading
CG FC200 is a good choice for ECU programming, especially for Bosch ECU. Here is a review of backuping a broken Bosch ECU: Back up a broken and shorted MED17.5.25 from a VW Tiguan 2018/2019 Success. All 6 power and… Continue Reading
Purpose: Can PCMtuner Tool read/ write Delphi CRD3XX, or other tools you would recommend. 1.PCMtuner CRD3 is not on the support list, but it can be done in Module 53 Tricore BSL to read micro and EEPROM. CRD3.10 and CRD3P… Continue Reading