BMW Diagnostic Tool
I have a 2014 M5 and flashed the car, the junction box and a bunch of other modules too, with ISTA/P 2.52.4 and an BMW ICOM clone A2 from www.worldobd2.com. It was the fourth or fifth car that I had… Continue Reading
I have a BMW ICOM clone and trying to connect to my BMW E46 with ista D, but it says it can’t read out vehicle order or VIN. Here I offer two solutions, just for sharing. Error: the vehicle could… Continue Reading
Question: BMW E46 misfire I have so random issues with my e46 a multiple of misfires, open and closed loop fueling while driving and I’m guessing a vac leak but it looks rich to me with short term fuel trims… Continue Reading
Coding is for people who want to play with the settings of BMW car software to achieve something more desirable. Coding is not really a programming; it is another name for re-configuring the software of your car. There are limited… Continue Reading
Problem: When I connect cable to car red led is on but when I try to connect via Inpa (airbag) led goes out and message says cannot connect, with Ncsexpert led is on until I select CAS and then it… Continue Reading
?Problem? –Case A with 2007 e92: So we ran into an error while coding an 07 e92 w/ cobb installed; did the digital speedometer stuff in the Kombi; and got a “speedometer malfunction” error; it’s still there even after coding… Continue Reading
I would show how to update BMW DME with WINKFP as follows. Note: This is done on a cloned CSL DME that I made and turned into a brand new virgin DME for flashing purposes. It was done on a… Continue Reading
Here is a great collection about WinKFP for BMW ICOM A2. With this post, you can find the solutions for all kinds of WinKFP error, including Error 209, Error 211, Error 106, Error 806. Error 209: UIF can not… Continue Reading
Problem 1: going to program my FRM using winKFP and i got this error: Error 201 on flash programming! Solution: check your winKFP configuration make sure it looks like this: Error 211 was because i didn’t have the power supply… Continue Reading
July, 2015 update: To run newest ISTA-D Rheingold 3.49.30ISTA-P 55.4.000 on BMW ICOM A2/A1, you need to update firmware to the newest version Current SYSTEM IMAGE version: 01.24.00 Current APPLICATION IMAGE version: 01.38.01 There are some ICOM hardware distinguished by… Continue Reading
