More TCU units are added into Alientech KESS3 V2.19. Connect via BENCH mode, directly from the TCU connector, and work safely on three of the most widespread transmissions in the European market: the 8-speed ZF automatic transmission used on Audi… Continue Reading
Alientech KESS3 V2.18 software is released! You can now work on an even wider range of Continental ECUs – EMS3141, EMS3140, and EMS3161 – installed on petrol engines from the Renault/Nissan group, from 2016 to the latest 2025 models. With… Continue Reading
New Alientech KESS3 V2.17 supports MD1CS004 ECUs with hardware H80 can only be managed via OBD. This KESS3 OBD Protocol for Bosch MD1CS004 allows workshops to efficiently work on vehicles produced from 2019 to 2025, opening up new opportunities on… Continue Reading
AutoTuner updates new OBD protocol on March 20th, 2025! The OBD protocol of the Bosch MD1CS004 ECU for 2.0L TDI VAG engines benefits from new improvements. About the H80 hardware: some versions can be handled in OBD mode, as this… Continue Reading
PAD FLASH ECU Tool Software is available on the official website. Users can download and install software themselves. Here we are going to show you how. How to Install PAD FLASH Software? Go to official website (https//padflashr.uk) and download… Continue Reading
Alientech KESS3 V2.16 now supports Marelli IAW 11MP, Mitsubishi BB5-8591A-XX, Mitsubishi BDW-86510-XX, Mitsubishi 32920-42FX0, and Denso 32920-13K00. Discover the world of two-wheel tuning and bring innovation to your workshop with KESS3 BIKE – BENCH/BOOT Protocols. New ECUs: ECU –… Continue Reading
Here is a review of OBDSTAR DC706 ECU Tool Read write MR140 Aveo 2015 no problem. MP001 Adapter and GODIAG GT100 make this job easier. However, there are many connection diagrams for those computers, and it comes wrong in OBDSTAR.… Continue Reading
OBDSTAR X300 Classic G3 Full Version has all licenses including ECU Cloning and Airbag Reset. Here we are going to show you how it repairs KM for Renault DCM3.4. Guidance: Turn on G3 Tablet, Select Odometer>>Renault/Dacia>>V41.16>>ECM>>Renault>>Delphi>>DCM3.4 Turn on P004 Adapter.… Continue Reading
CG FC200 V1.2.6.0 is available! New version updates ME7.4.5, ME7.9.8, and more. Free Download FC200 Software: V1.2.6.0 FC200 FC200 New Version [1.2.6.0] New Functions: 1.”Three readiness monitors not ready” function: DELPHI domestic models: MT22.1, ME22.1.1, MT22U Jiangling/Foton/Great Wall:… Continue Reading
Alientech KESS3 V2.15 is available! New updates includes Delphi DCM2.7AP OBD Mode and more! Innovate your workshop with KESS3 and fully exploit KESS3 TRUCK/TRACTOR – OBD Protocol and KESS3 TRUCK/TRACTOR — BENCH/BOOT protocols. New ECUs: ECU – BENCH/BOOT Denso… Continue Reading
