Lexia 3 PP2000 woks well on Peugeot 307 (Review)

This is a review from a customer at www.worldobd2.com.

“Days ago, I just bought Lexia 3 PP2000 for my Peugeot 307 from a Chinese seller introduced by a friend working in a repairing garage.

This is my Peugeot.

Peugeot 307

My Lexia-3 package:
lexia 3-package

Full-chip-Latest-v7-76-Lexia3-Lexia-3-PP2000-for-Citroen-Peugeot-diagnostic-tool-Lexia-3

Only took 5 days after ordering it. Well-packed with a paper box and a plastic bag. No damage!

The connection pic:

This connection pics were from the nice wobd2 customer service. The second one they said is Lexia 2, the former of LEXIA 3. I am new to car diagnosis and cannot connect this Peugeot scanner well to 307.

Connection tips I just copied from e-mail 😀
1. Look under the Peugeot driver-side dashboard for the diagnostic trouble code (DTC) connection port. It is black, rectangular-shaped and roughly one inch wide by a 1/4-inch tall. It should have a small cap on it to prevent dirt from entering the connector. Quite often the cap will have the letters “DTC” embossed on it.

2. Remove the cover from the connection port and move the cover off to the side. Lexia 3 PP2000 should be attached to the port by a thin strand of plastic to prevent the cap from being lost.Plug in your Lexia 3PP2000’s OBD-ii cable to the connection port.

3. Turn on your Lexia 3 PP2000 diagnostic tool,Write the codes down from the Lexia 3 PP2000 Peugeot Citroen Diagnostic tool, once you have them, as you will need to refer to them during the troubleshooting process that is easy to contact and use it.
Then this is what I did on 307 with Lexia3 Peugeot Planet 2000.
lexia-3-diagnostic-pp2000-1

lexia 3 pp2000-peugeot 307
lexia 3 pp2000-peugeot 307 (1)
lexia 3 pp2000-peugeot 307 (2)
lexia 3 pp2000-peugeot 307 (3)
lexia 3 pp2000-peugeot 307 (4)
lexia 3 pp2000-peugeot 307 (5)

This product is good at reading/clearing trouble codes. Also, I used this to read live data of battery voltage, oxygen sensor, coolant temperature. No problem.

The only point I want to complain is without WIFI functions. I have ever seen my repairing friend use SDconnect c4; that can be connected by WIFI— sounds cool. Looking forward that the next LEXIA products will be better.

Oh, forget to mention that the PCB board the seller sent.

lexia-3-c-original-2

lexia-3-c-original-1

 

lexia-3-c-original-3

I am new so I am not able to learn PCB board. Of high quality? They said their chip is the same as the original. Maybe~ If it works well, I never mind whether it is original or not.

It is my first time to write a review. Hope this help all in need of Lexia 3 PP200.

PS. Be careful to China clones!! I was ever cheated by some dishonest sellers.”

Sales auto-diagnosis.org