Wifi PIWS2 Tester II Development Mode – it’s all here

Here, worldobd2.com offers all useful information about Porsche PIWS2 Tester II v16.2 Development Mode, including tools suggestion, dev mode functions and vehicles (e.g. Cayenne 92A MY 2011).

Porsche tools for Development Mode

1. PIWS2 Tester II with v16.2 software

Porsche tester 2 with PCB of quality A

2. laptop suggestion: Panasonic laptop CF30

2. CPU: L7500RAM: 4GDisplay: 13.3” HD LEDGuarantee: 3 MonthsPIWS2 Tester 2 Development Mode Setup1.TOOLS——Online Update2.Select Development Mode (E mode) if you use other mode (Aftersales: V mode/ Production: P mode) before. Then save data.3.Click Yes, then to close

    

   Porsche PIWS2 Development Mode support functions

   1.Start/stop “LAST MODE” waiting for the flame to change memory

   2.Spoiler “advance speed

   3.Spoiler “fixed”

   4.Spoiler “angle changed”

   5. Active implementation plan VO code changes
   6. Air pump closed
   7. Power upgrade
   8. Tire pressure sensor remove
   9. Installation of reversing camera
   10. Install USB/BT
   11. Seat belt warning turn off

   12.CDR/PCM interface change

   13. Air conditioning in memory

   14.CDR_AUX Function enabled

   15.PCM_ Function enabled

   16. Manual set codes
   17. Auto set code
   18. Manual programming
   19. Automatic programming without program rules

    

   PIWS2 II support vehicles

   1. 911(997) (991)
      2. Boxster/Cayman (987)
      3. Cayenne up to MY 2010
      4. Cayenne from MY 2011
      5. Panamera

    

   PIWS2 2 Dev Mode DIY Guide

3. NOTE 1: Please first install WinRAR and Winhex on your computer. Then to do setup as follows.
   1. Locate the file: C:Program FilesPorschePIDT_P_MIG_DLSS3pidtpluginsde.dsa.pidt.datatype.jar and copy it on your desktop in order to modify it.
   2. Open it with WinRAR, and then in the WinRAR windows locate the file:
   dedsapidtdatatypesutilsHelper$1.class and drag it on your desktop, then delete it from the archive after the copy, and keep the WinRAR window open.
   3. Open Helper$1.class on your desktop with Winhex and go to offset E81, replace 9A by A7 and save.
   4. Drag back the save file on the WinRAR window still open and click OK. Now Close WinRAR.
   5. Copy the new file de.dsa.pidt.datatype.jar you just made in C:Program FilesPorschePIDT_P_MIG_DLSS3pidtplugins, and overwrite it.
   6. Copy the file aftersales.sig on your desktop and rename it development.sig Copy this file back in the folder.
   Aftersale.sig is located in C:Program FilesPorschePIDT_P_DLS3Pidtworkspace
   and in C:Program FilesPorschePIDT_P_MIG_DLS3Pidtworkspace
   7. Do exactly the same method given above with the folder
   C:Program FilesPorschePIDT_P_DLSS3 with its own files.
   To transform it in developer:
   Settings > Diagnostic configuration > 981-991 > mode > operating mode
   E= development, P= production, V= aftersales (Regular PIWS2 II)
   Other models line > mode > operating mode
   E= development, P= production, V= aftersales (Regular PIWS2 II)
   E= Entwickler, P= Produktion, V= Verkauf (Standarteinstellung PIWS2 II)NOTE 2: The Development Mode DIY guide here is a cutomer solution; wobd2 has not tested yet and you may be at risks to hav a try. Good luck.PIWS2 2 Dev mode on Cayenne 92A MY 2011 Attachment: Developer Manual for PIWS2 II (German)