Took some pics of the amb2300 Bluetooth module on the VAS 5054A without shield so we can have a gander at the chips beneath
Good (from vas 5054a genuine)
Bad (from vas5054a clone)
Note: VAS5054A China has two versions of AMB2300 BT module inside. Version A is much more better than Version B.
So here we have shield off. Both had exactly the same shield but if I am not mistaken the one below is bad. Differences also exist on underside of board with missing components.
The bad AMB did not have the tell tale signs previously mentioned to me.
But if you have no luck with a good BT module, or don’t have AMB2300 BT module, you also have fix:
Download vas5054a firmware update fix: (by Fantomel)
https://mega.nz/#!MSIj1aJJ!XDWayKXbrN8fTqogwoA_26ECIMYCctHl11zUKB6Rdrg
To fix this and make it work you must replace after install of package these files from 1.20.020 to your current version
for odis-s 2.2.3 and 2.2.4
C:\ODIS-DIAG-MODULES\PDUAPI\VEN-SOFTING\1.20.023\VeCom\VAS5054
for odis-s 2.2.6
C:\Program Files\Softing\D-PDU API\1.20.029\VeCom\VAS5054
for odis-e 6.2.2?
C:\Program Files\Softing\D-PDU API\1.20.023\VeCom\VAS5054
for odis-s 3.0.0
C:\Program Files\Softing\D-PDU API\1.20.034\VeCom\VAS5054
Good luck!