Here comes the newest VAS 5054A ODIS V2.27 . All tips here for sharing.
What’s new in ODIS V2.27:
1 estimated remaining time is displayed for ECU flash operation.
2 Diagnostic protocols contain the disruption of GFF session, extended measurement value, improve communication ECU watch,
3 Using the hardware diagnostics, hardware diagnostic connection, OS, hotfixes use and submissions of requests for assistance
4 measured value display has been improved.
5 document in GFF is displayed in a separate window.
6 a message box will be displayed at the beginning of the test drive mode.
7 GFF hotfix can be integrated in the diagnostic session.
8 Dangerous message has been modified.
9 stop the diagnostic session may be interrupted.
10 automatic deletion of automatic saving diagnostic protocol after successful transmission.
11 passthru selecting hardware diagnostics has improved.
12 ODIS software update service was unstable.
Computer requirement:
Windows XP
/ Wind 7 System (better)
Available device:
VAS 5054A ODIS
Update: via CD
VAS 5054A 2.27 update procedure:
Steps:
1. Install Gadget
2. Choose license.dat and install ODIS
3. Replace OffboardDiagLauncher.exe in 0.2Patch License
4. Activate DAEMON Tools
5. Mount PostSetup.iso from PostSetup.
6. Start and close ODIS
7. Set Update=0
8. Start ODIS
9. Add 5054A to the computer via Bluetooth
10. Run ODIS Service Diagnostic…
11. Run ODIS 2.27
1. Install Gadget
Open Computer>> (F:), to copy the zip file “Daemon_Tools_4.49.1.356” to Desktop. Then right click it for Extract files… Click OK.
Open the extracted folder “Daemon_Tools_4.49.1.356” on Desktop.
Select “InstallGadget” to Run as administrator.
Click “This program installed correctly”.
Click Install.
Click “+ add virtual drive” on DAEMON Tools in the top right corner.
Click Install.
2. Choose license.dat and install ODIS
Open Computer>>(F:)>>01.Setup>>ODIS-S v.2.2.6-RC369L_P6 Setup.
Select a language: English (US), and click OK.
Click Continue to install Offboard Diagnostic Information System Service.
Click Continue.
Click Continue.
Select the application languages(up to 5), then click Continue.
Click Continue.
Click Continue.
Click Continue.
Select the licence file: Computer/ (F:)/0.2Patch License/License.dat, then Continue.
Click Continue.
Installing Offboard Diagnostic Information System Service…
Click Install to install this device software Softing Automotive Electronic GmbH.
Click Finish to complete setup.
3. Replace OffboardDiagLauncher.exe in 0.2Patch License
Go to Computer>> (F:)>>0.2Patch License, to copy “OffboardDiagLauncher”.
Right click Offborad Diagnostic Information System on Desktop for “Properties”.
Click Open File Location, to paste OffboardDiagLauncher.
Select Copy and Replace. Then close the interfaces.
4. Activate DAEMON Tools
Click folder icon on DAEMON Tools in the top right corner.
Prompt: Unable to find activated DAEMON Tools. Click Continue.
Select “Free License”, and then click Activate.
Click Validate.
Click Close when your license was validated successfully.
5. Mount PostSetup.iso from PostSetup.
Go to the blank space in the Image Catalog square, to right click to Add Image.
Open Computer/(F:)/0.3PostSetup 6.70.150/PostSetup 6.70.150.
Right click PostSetup_6.70.150.iso to Mount.
Close AutoPlay interface.
Minimize DAEMON Tools Lite – Free License.
6. Start and close ODIS
Open Offborad Diagnostic Information System on Desktop.
Click to Select local directory… : Computer/BD-ROM Drive (G:) 100/Postseup, then click OK.
Input user name and keyword: abc. Then click the right arrow to continue.
Update check results: click to go on.
Process dialog… (wait for 1 hour)
Read Warnings, and then scroll down it and click OK.
Close ODIS 2.26.
Right click Computer for Manage.
Select Device Manager>>Softing Vehicle Interface>>VAS5054. Then close the interface.
7. Set Update=0
Open Computer>>(F:)>>readme, and minimize it.
Right click Offborad Diagnostic Information System on Desktop for Properties.
Click Open File Location.
Open Program Files/ Offborad_Diagnostic_Information_System_Service/ Configuration /.settings/ org.eclicpse.internal.prefs
Click on “Select a program from a list of installed programs”, then click OK.
Open with Notepad.
Find out Update=1450680530416, replace it with Update=0. Then save data.
Then save data.
Close the notepad.
8. Start ODIS
Open Offborad Diagnostic Information System on Desktop
Read Warnings, and then scroll down it and click OK.
Switch to Release Notes. Click OK.
Click the last line Starting diagnosis.
Click Continue.
Finish vehicle basic information and click Apply.
Click the lien “Standard order…” and then click No. RO.
Click Continue.
Click Line “Address 01…” and DTC memory list.
Click Engine Control Module 1.
Click Diagnosis at the bottom line.
Click Yes to cancel diagnostic entrance.
Process diag…
Close ODIS 2.27.
9. Add 5054A to the computer via Bluetooth
Click the Bluetooth in the Desktop menu column, to Add a Device.
Select VAS5054 <082145725>, then click Next.
Enter the pairing code for the device. (the code is either displayed on the device or in the information that came with the device)
Click Next.
Click Close when successfully added 5054a to computer.
10. Run ODIS Service Diagnostic…
Open ODIS Service Diagnostic… on Desktop.
Click Add EDIC…
Select VAS5054, then click OK.
Click OK after reading the warning:
– your interface (EDIC) is powered now and within range.
– your Bluetooth Hardware is connected to your PC.
– your interface(EDIC) has been paired to your Bluetooth hardware.
– a local Bluetooth COM-Port has been assigned by your Bluetooth software.
Select COM Port: Standard Serial over Bluetooth link (COM4), then click OK.
Click the first line and OK.
11. Run ODIS 2.27
Open Offborad Diagnostic Information System on Desktop
Click OK.
Page down and click OK.
Click Starting diagnosis.
Check if the ignition is switched on in the vehicle. Click Continue.
Finish the vehicle basic feature. Click Apply.
Select the first line and click No RO.
Click Networking diagram, then click the content.
Click continue to enter diagnosis.
Click MOT_O1.
Click Control Module List
Click DTC memory, and click the first line”Engine Control Module 1”, then Diagnosis.
Click Yes to cancel diagnostic entrance.
Click the cross button under the operating modes.
Click Yes to end.
Done.
PS. Read more about VAS 5054A, please go to
http://www.worldobd2.com/producttags/vas-5054a.html
