How to install VAS 5054A ODIS V2.26 in Win 7 System

Hello, this is the instruction on how to install newest ODIS V2.26 for VAS 5054A. Hope it helps.

Computer requirement:
Windows XP/ Wind 7 System

Available device:
sp33-c
sp33
sp33-b
sp33-bo

Update: via CD

How to install 5054A 2.26?

Steps:
1. Install Gadget
2. Install Offboard Diagnostic Information System Service
3. Activate DAEMON Tools
4. Run Offborad Diagnostic Information System
5. Diagnosis
6. Add 5054A to the computer via Bluetooth
7.Set COM Port and install EDIC hardware
7. Run Offboard Diagnostic Information System to Diagnosis
1. Install Gadget
Open Computer>>ODIS-2.26 (F:), to copy the zip file “Daemon_Tools_4.49.1.356” to Desktop. Then right click it for Extract files… Click OK.
Open the extracted folder “Daemon_Tools_4.49.1.356” on Desktop.
Select “InstallGadget” to Run as administrator.
Click “This program installed correctly”.
Click Install.
Click “+ add virtual drive” on DAEMON Tools in the top right corner

Click Install.

2. Install Offboard Diagnostic Information System Service
Open Computer>>ODIS-2.26 (F:)>>01.Setup>>ODIS-S v.2.2.6-RC369L_P6 Setup.
Select a language: English (US), and click OK.
Click Continue to install Offboard Diagnostic Information System Service.
Click Continue.
Click Continue.
Select the application languages(up to 5), then click Continue.
Click Continue.
Click Continue.
Click Continue.
Select the licence file: Computer/ODIS-2.26 (F:)/0.2Patch License/License.dat, then Continue.
Click Continue.
Installing Offboard Diagnostic Information System Service…
Click Install to install this device software Softing Automotive Electronic GmbH.
Click Finish to complete setup.

Go to Computer>>ODIS-2.26 (F:)>>0.2Patch License, to copy “OffboardDiagLauncher”.
Right click Offborad Diagnostic Information System on Desktop for “Properties”.
Click Open File Location, to paste OffboardDiagLauncher.
Select Copy and Replace. Then close the interfaces.

3. Activate DAEMON Tools
Click folder icon on DAEMON Tools in the top right corner.
Prompt: Unable to find activated DAEMON Tools. Click Continue.
Select “Free License”, and then click Activate.
Click Validate.

Click Close when your license was validated successfully.

4. Setup Offborad Diagnostic Information System
Go to the blank space in the Image Catalog square, to right click to Add Image.
Open Computer/ODIS-2.26 (F:)/0.3PostSetup 6.70.150/PostSetup 6.70.150.
Right click PostSetup_6.70.150.iso to Mount.
Close AutoPlay interface.
Minimize DAEMON Tools Lite – Free License.
Open Offborad Diagnostic Information System on Desktop.
Click to Select local directory… : Computer/BD-ROM Drive (G:) 100/Postseup, then click OK.
Input user name and keyword: abc. Then click the right arrow to continue.

Update check results: click to go on.
Process dialog… (wait for 30 minutes)
Read Warnings, and then scroll down it and click OK.
Click “Admin” in the right menu.

Set Brand Design: Volkswagen; Language: English(US).
Click Diagnosis in the right menu and click the cross button under the operating modes.
Select Yes to end.

Open Computer, right click BD-ROM Drive(G:) 100 for Eject.
Open the minimized DAEMON Tools Lite – Free License, then close it.
Close DAEMON Tools in the top right corner.
Prompt: VAS5054 Device driver software installed successfully.
Right click Computer for Manage.
Select Device Manager>>Softing Vehicle Interface>>VAS5054. Then close the interface.

5. Diagnosis
Open Offborad Diagnostic Information System on Desktop
Read Warnings, and then scroll down it and click OK.
Click the last line Starting diagnosis.

Check if the ignition is switched on in the vehicle. Click Continue.
Finish the vehicle basic feature. Click Apply.

Select the first line and click No RO.

Click Networking diagram, then click the content.
Click continue to enter diagnosis.

Click MOT_O1.

Click Control Module List

Click DTC memory, and click the first line”Engine Control Module 1”, then Diagnosis.

Click Yes to cancel diagnostic entrance.
Click the cross button under the operating modes.
Click Yes to end.

6. Add 5054A to the computer via Bluetooth
Click the Bluetooth in the Desktop menu column, to Add a Device.
Select VAS5054 <082145725>, then click Next.
Enter the pairing code for the device. (the code is either displayed on the device or in the information that came with the device)
Click Next.
Click Close when successfully added 5054a to computer.

7.Set COM Port and install EDIC hardware
Right click computer for Manage.
Select Device Manager>>Standard Serial over Bluetooth link (COM4) & Standard Serial over Bluetooth link (COM5).
Network adapters>>Bluetooth Device (Personal Area Network) #2 & Bluetooth Device (FRCOMM PROTOCOL TDI) #2.

Close Computer Management.

7. Run Offboard Diagnostic Information System
Open Offboard Diagnostic Information System on Desktop.
Click Add EDIC…
Select VAS5054, then click OK.
Click OK after reading the warning:
– your interface (EDIC) is powered now and within range.
– your Bluetooth Hardware is connected to your PC.
– your interface(EDIC) has been paired to your Bluetooth hardware.
– a local Bluetooth COM-Port has been assigned by your Bluetooth software.
Select COM Port: Standard Serial over Bluetooth link (COM4), then click OK.
Click the first line and OK.

Open Offborad Diagnostic Information System on Desktop
Click OK.
Page down and click OK.
Click Starting diagnosis.
Check if the ignition is switched on in the vehicle. Click Continue.
Finish the vehicle basic feature. Click Apply.
Select the first line and click No RO.
Click Networking diagram, then click the content.
Click continue to enter diagnosis.
Click MOT_O1.
Click Control Module List
Click DTC memory, and click the first line”Engine Control Module 1”, then Diagnosis.
Click Yes to cancel diagnostic entrance.
Click the cross button under the operating modes.
Click Yes to end.

Done.
PS. Read more about VAS 5054A, please go to
http://www.worldobd2.com/search/?q=VAS+5054A&DirID=