Porsche PIWS2 Tester II PIWS2 15.01 with multilanguage is the latest professional tester of high quality for Porsche,with powerful functions,full access.
Choose the language you need.
Choose your car model.
Loading ODX data…
Initializing user interface (Diagnostic application starting. )
Select control unit and continue to control unit search with [F12] when you see the interface. Then click “NEXT” at the bottom right corner.
The model line would not be determined. Please check whether the vehicle belongs to model line Cayenne. Click “NEXT”
Creating vehicle analysis log…Click “NEXT”
Check the chassis number and correct if necessary.
Select log type and confirm with .
Then the software will write vehicle analysis log
Click the control unit. Then turn to the “Fault memory” page.
Clear all or selected warning-event entries with [F8]. Then turn to “Actual values input signal” page.
Select the group you want to display and continue
Select values and press [F12] to read the selected values.
After reading all the current actual values, switch to “Coding adaptations”.
Choose “Manual coding” and click “NEXT” to enter 17-character VIN. Then go on “NEXT”.
You will be told that “The value cannot be changed”, and you need to click “NEXT” to change values..
Change values of S35 – LONG OIL LEVEL PROBE PULSE 2and continue.
Select a value from the list and you will get the latter diagram.
Again, you will be told that “The value cannot be changed”, and you need to click “NEXT” to change values..
Change values of SM5 – DUEL MARKET B and continue.
Select a value from the list and you will be told that coding was not completed successfully.
Turn to “Programming” page, and choose “Automatic programming” to continue.
Then you will read the control unit and total duration for programming and coding.
Click “NEXT” in the campaign.
Next, choose “Adaptations” on the page of “Maitenance repairs” to observe information about adaptation.
Continue to choose “Kickdown adaptation”, and then back to “Extended identifications” as follows:
Turn to “Overview” page and you will find the control unit search has been completed.
Finally, select the control unit to terminate application.
All above is about how to use PIWS2 Tester II V15.1 with CF30 laptop for Porsche.