JDiag Elite J2534 Auto Diagnosis and ECU Programming
Nowadays, wobd2 release the most validated and accepted J2534 device in the world- “JDiag Elite J2534 Diagnostic Coding Programming Tool”, the new generation J2534 tool from JDiag Inc. The most details of it is offered here.
Jdiag Elite hardware
– specification
– connector and light indicator
– Jdiag tablet details
Jdiag Elite software
– functions
– vehicle & software list
– how to run Jdiag elite software
Jdiag Elite advantages & disadvantages
-Autoboss V30 vs. Launch X431 V vs. Autel MaxiSys Pro MS908P vs. JDiag Elite J2534
– top reasons to get JDiag ECU tool
Jdiag Elite hardware
Specifications:
Operating voltage: 7-26 Volts
VCI Size: 20cm (L) x 14cm (W) x 4.5cm (H)
Operating Temperature: Commercial Range (0 to +70 C)
ISO22900 Compliant for GM’s Tech2WIN software
J-diag connectors & status indicators
front
The yellow warning light indicates that the JDiag Elite is communicating
with the vehicle. Do not disconnect anything while the yellow light is
illuminated! Refer to Table 1 for a description of the other status lights.
Rear
The red external programming socket provides access to the 5V-20V
programming voltage. This is used for Mitsubishi, Subaru or any other
vehicle that needs voltage on an additional connector.
Vehicle Connector
The mating connector is a standard MVCI, High Density DB-26.
Ethernet Lights
Use the crossover cable (blue with red ends) to connect directly to a laptop. The Ethernet port on JDiag has two indicator lights.
A/D Inputs Connector
The 12-bit analog inputs are setup for an input range of 0 to 27.5VDC and are electrically protected against reverse voltage and over voltage conditions. The Mating connector is a High Density DB-15.
Jdiag Computer Configuration:
Name: JDiag Tablet
CPU: Intel 1037U
RAM: 4G
HDD: 500G
Screen: 11.6 Inch
Condition: NEW
Software: 36 brands well installed
Details:
USB Cable
Wired RJ45 Ethernet
Wireless Card (Optional)
Compliant to SAE J2534 (Feb 2002) and SAE J2534-1 (Dec 2004) SAE J2534-2 (Dec 2014)
Compliant to ISO 22900-1 MVCI physical layer
Programming voltage on J1962 pin 6, 9, 11, 12, 13, 14 or Aux
6 General purpose analog inputs (0-27V, 2Ksps, 12 bit)
Ground pins 9, 12, or 15
Internal Compact Flash slot (must be configured when ordering)
Optional external Compact Flash slot
Jdiag Elite software
The JDiag offers a wide range of capabilities including:
Module Programming
Diagnostic Functions
Key programming
Data monitoring
Reprogramming:
JDiag is an advanced J2534-1 product for reprogramming. Use the OEM’s software to offer J2534 reprogramming with ALL OEMs.
JDiag offers extra J2534-2 support that expands reprogramming beyond just Engine/Trans support for Ford, GM, Toyota, Volvo, BMW,
and some others.Technicians can use JDiag for Security Key systems/programming on Ford, GM, and Toyota vehicles.
JDiag Diagnostics:
Using the OEM’s own software, JDiag is compatible with Toyota Techstream, Honda HDS, Mercedes Benz Passthru, VAG ODIS,
Nissan Consult, GM GDS2, BMW ISPI NEXT, and Volvo VIDA for factory diagnostics.
As J2534 continues to grow, the number of OEM’s offering a factory diagnostic solution will likewise grow.
Jdiag software list
| Area | Brand | Diagnostic | Programming | Version | Operating system | |
| USA | GM | GDS2 | TISWeb | 2016.02 | Windows 7 | |
| Opel | ||||||
| SAAB | ||||||
| ISUZU | ||||||
| SUZUKI | ||||||
| Ford | Forscan | Forscan | 2.2.11 | |||
| Mazda | ||||||
| Europe | BMW | ISTA/D | ISTA/P | ISTA-D 3.54.11
ISTA-P 3.58.0.5 |
Windows 8.1 | |
| BMW mini | ||||||
| BMW Motorcycle | ||||||
| Rolls-Royce | ||||||
| VW | ODIS | ODIS | V3.0.1 | Windows 7 | ||
| Audi | ||||||
| Skoda | ||||||
| Seat | ||||||
| Lamborgini | ||||||
| Bently | ||||||
| Bugatti | ||||||
| Jaguar | SDD | SDD | V142 | |||
| Land Rover | ||||||
| Volvo | VIDA | VIDA | 2014D | |||
| Mercedes-Benz | XENTRY / DAS | XENTRY / DAS | 2015.09 | |||
| Smart | ||||||
| Maybach | ||||||
| Setra | ||||||
| Cobus | ||||||
| Mitsubishi Fuso | ||||||
| Japan | HONDA | HDS | HDS | 3.015.033 | Windows 7 | |
| Acura | ||||||
| Toyota | Techstream | Techstream | V10.003 | |||
| Lexus | ||||||
| Scion | ||||||
| Subru | Select Monitor III/ IV | Select Monitor III/ IV | 2016 | |||
| Nissan | Nissan J2534 ECU Tool | Consult III plus | V52.11 | |||
| Infinit | ||||||
| DATSUN | ||||||
How to run Jdiag elite software on the laptop in the package?
1 start the laoptop
2 Input the security boot password
password: jdiag
3 Choose the OS software you need
1) ODIS| Techstream| Forscan| HDS| JLR| GDS2| Consult III+|Subaru
2) ISPI NEXT
3) Xentry Passthru
OS 1
OS 2
OS 3
Note:
The operation system 3 which with automatically recovery function
please don’t put any important files or database on this system, we
strongly recommend you save your data to USB sticky.
Jdiag Elite advantages & disadvantages
Autoboss V30 vs. Launch X431 V vs. Autel MaxiSys Pro MS908P vs. JDiag Elite J2534
Top 4 features of the Jdiag system:
1.With a Jdiag laptop. Software pre-installed.
2.Support comprehensive diagnosis, Module Programming,Key programming,Data monitoring
3.Global Version, no region limitation
- Free online update for lifetime. Official website: http://www.jdiag.com
details from
http://www.worldobd2.com/wholesale/jdiag-elite-j2534-diagnostic-and-coding-programming-tool.html
