One customer asked how to program 2022 Toyota Sienna 8A-BA Smart key. The smart box is TMLF19D which is different than Corolla’s TMLF18D-1 or Avalon’s TMLF15-1. The pins of TMLF19D smart box is 30pin, so if we could connect Autel… Continue Reading
There are multiple models of Launch X431 Diagnostic Tablet, what are the differences between these diagnostic tablets? Here we will see. X431 Diagnostic Tablet Comparison: Launch X431 Series Product Comparison Table Model X431 Pros Mini X431 Pros V X431 V+… Continue Reading
Here we will show you how to code an EGS from a BMW 2013 F10 after its transmission is swapped. To swap a EGS, we can’t only use Autel Ultra, because it is immobilizer-related, and also we have to pick… Continue Reading
In this article, we are going to show you how to use the new Launch X-431 ECU & TCU Programmer that allows users to read/ write/ process/ checksum gearbox. X-431 ECU & TCU Programmer is standalone, while X-PROG3 PC Adapter… Continue Reading
One customer wondered if VVDI Super Chip can be used on Autel K100? So here are tests of VVDI Super Chip XT27A and XT27B with both Autel KM100 and Key Tool Max. 1.XT27A Chip is set as Blank Hi-tag… Continue Reading
V2023.6 BMW ICOM Software is released now with ISTA-D 4.41.30 ISTA-P 70.0.200. New software requires at least 1T memory due to FG database of the new version. Compatible Devices: Super ICOM PRO N3+ VXDIAG BMW V2023.6 BMW ICOM Update… Continue Reading
In this article, we are going to show you how to renew update subscription of Autel tablets using Autel Total Care Program (TCP) Card. How to Use Autel TCP Card? 1.Buy update service of your Autel model 2.Go to Autel… Continue Reading
Here we will show you two handy key programmers — Xhorse Key Tool Max and Autel KM100. They both work well but there are some differences. Remote Control The biggest difference is to generate remotes. Autel is more capable on… Continue Reading
This is a customer review of Launch X431 CRP919E. Let’s see how it is doing on bi-directional and other functions. 1.First Impression Package First one of the best things I like the best is the box that it comes… Continue Reading
Question: How can we program keys or clone ECU in Launch X431 Diagnostic Tablet? The answer is X-PROG 3 Adapter or GIII MCU3 Adapter. 1.How to Enable Key Programming Functions? *X-PROG 3 is required, GIII MCU3 is only required… Continue Reading
