One customer wonders how is PADFLASH for Mercedes CRD3.10? Here are our tests by Bench& OBD mode. 1)OBD Run PADFLASH software. Select Mercedes>>C KLASSE (from 2010)>>1.8/2.2 CDI Blue 136/177/204HP Delphi CRD3.X CAN Fast (TC1797) Connect PADFLASH to CRD3.10 as required.… Continue Reading
Here is a review of OBDSTAR DC706 ECU Tool: Chevy Cruze >> SIMTEC76.1 ECU info Bench mode connect for R&W flash not working Adapter Supply 14&15 V Boot Mode working Let’s check out how it is done. Read ECU… Continue Reading
Here we have an affordable tool that will add key for BMW G-Series BDC2 system – CGDI A2 Full Version. Let’s check out how it did the job. Turn on CGDI A2. Select BMW V1.03>>System selection>>BDC Immobilizer (G chassis) 1.Back… Continue Reading
This article will show you how to add key for BMW G-Series X3 using Autel IM508/ IM608. Tools: Autel IM608 II (with Autel License for BMW G-Series BDC2 Add Key) Autel BMW Key Guide: On tablet Select IMMO>>BWW>>Smart… Continue Reading
Launch CANFD Cable allows Launch CRP919 BT to diagnose CANFD protocol cars. This cable also works with other Launch Creader Series Tablets. Here we will show you how. Guide: Disconnect CANFD cable. Connect it to OBD cable and port.… Continue Reading
Question: OBDSTAR G3 or OBDSTAR DC706 having issues with the OBDSTAR TCM-019 Cable. I’ve tried on 4 different transmissions and I can’t get it to read anything at all. Have the same problem with the TCM-025 ZF 8HP Connectors. Here… Continue Reading
AutoTuner new release for Getrag 7DCT300 TCUs, now supported in OBD mode for Alpine, Dacia, Nissan, and Renault vehicles! This new protocol allows virtual reading (VR) and fast writing directly through the OBD port, without opening or disassembling anything. It… Continue Reading
One customer asked how to connect Launch X431 Key Programmer to tablets like CRP919 BT and X431 PRO Elite. Here we will show you how. How to Connect Launch CRP919 BT to X431 Key Programmer? Turn on CRP919 BT. Select… Continue Reading
Alientech KESS3 2.26 update info: Read, write, and clone in BOOT mode* the Continental SIM2K-142, SIM2K-143, and SIM2K-245 ECUs and TCUs, installed on 2.0 MPi and 2.4 MPi engines. This is an effective solution for professionals who work daily on… Continue Reading
CG FC200 V1.2.9.0 update DTC OFF for Bosch ECUs. CG FC200 Update Info (2025.05.24): New Functions: Added “DTC OFF” function, first batch of models: BMW BOSCH: EDC16C31, EDC16C35, EDC16CP35, EDC17C06, EDC17C41, EDC17C50, EDC17C56, EDC17CP02, EDC17CP09 Mercedes DELPHI: CRD2.x, CRD3.x… Continue Reading
