One customer had a problem with BMW EDC17CP02 CP06 on bench. With every pin connected and bench box powered, FoxFlash Hardware can’t read. Here Cardiagtool tech shares the Solution: 1.Repin ECU with alternate pinout(2 types) 2.Switch off MFC until commanded… Continue Reading
Question: Is it possible to fix this FoxFlash? I gave power to the programmer from both sides to make it damaged, and now it has no communication with the laptop Regards There is no visible damage on the board. Here… Continue Reading
Question: GPEC2 ecu in boot, double checked my pin out and the CNF1 with testing but can’t read. Using bench box then remove, in both ways same result. I just think it is locked ecu 2015 plus. Possible for FoxFlash… Continue Reading
One customer gave feedback: FoxFlash did not read PSA Mev17.4 on Bench, with 12v and 13.5v. If MEV17.4 TC1766 Peugeot could be read with PCMtuner? Answer: Both work but there are 3 possible pinouts. Confirm the wires of terminals are… Continue Reading
Question: Can FoxFlash read/ write gpec2? Here Cardiagtool tech Answer: FoxFlash Software support GPEC2A, GPEC3, GPEC4, GPEC4LM but not GPEC2. Here is all supported GPEC PCM: Brand vehicle Model vehicle Engine/gear type ECU Brand ECU Type Info Micro Info EEPROM… Continue Reading
Here we are going to show you how to download and install FoxFlash Software step by step. Free Download FoxFlash Software: FoxFlash Manager (Main Software: Download via “FoxFlash Manager” after activation) Operating System: Windows 7/ 8/ 8.1/ 10/ 11… Continue Reading
