Question: GPEC2 ecu in boot, double checked my pin out and the CNF1 with testing but can’t read. Using bench box then remove, in both ways same result. I just think it is locked ecu 2015 plus. Possible for FoxFlash… Continue Reading
Question: Does KT200 work only online? where we could read and write offline? Answer: Yes, KT200 could work offline with KT200 Offline Workstation. *Offline workstation is only compatible with KT200 Full Version (for KT200 Auto Version, pay KT200 Update Service… Continue Reading
Is FoxFlash possible to read EDC17CP54? One customer gave feedback that his FoxFlash can’t read it. Besides, all cable connection is fine he had checked. Here is the Solution: 1.Pin 50 on the central row +12v Not pin 33 +12V… Continue Reading
One customer gave feedback: FoxFlash did not read PSA Mev17.4 on Bench, with 12v and 13.5v. If MEV17.4 TC1766 Peugeot could be read with PCMtuner? Answer: Both work but there are 3 possible pinouts. Confirm the wires of terminals are… Continue Reading
Here is a review of R/W VAG Simos18.1 successfully: Simos 18.1 VAG KT200 Yes! Don’t forget the power supply 13,5v DC and it works perfect. Car: Vag Golf7 Performance 2.0 GTI 230Hp ECU: Simos 18.1 SAK TC1791, Mod Stage1 301Hp… Continue Reading
Question: New V12.10 KT200 software doesn’t show ECU info when selecting protocol driver. Here Cardiagtool tech shares the Solution: Download “auto.txt” file, and put it into “KT200-master” folder. (Click to Download File) Review from Giovanni Sutera: Before: Solved! Hope… Continue Reading
Question: SID309 OBD password unlock stop at 57%. Waited for 20 minutes and nothing was happening. How to make FoxFlash Software continue? Here Cardiagtool tech Answer: When reading password via OBD (IN CAR) please ensure immo system does not become… Continue Reading
V2022.12.10 KT200 Software is available now! SID310 in OBD mode is added and more updates are coming. Free Download V12.10 KT200 Software: V2022.12.10 KT200 How to Install? Unzip it into the C:\KT200-master folder and overwrite the file OS: Windows 7,… Continue Reading
Question: Possible to read SID307? I have KT200 and PCMtuner. Answer: Both work. KT200 support Dacia/Mercedes/Nissan/Renault SID307 by Boot mode; PCMtuner support Renault/ Nissan by OBD mode. 1.PCMtuner V1.27 Module 25 Renault/Nissan 1.5dCi 1.5L dCi Delphi DCM 1.2 (ST10/512KB) 1.5L… Continue Reading
One customer wondered if KT200 Programmer can read/ write PSA DCM6.2A in bank? Or can only do it in OBD Answer: On Bench/ OBD on Bench/ Jtag BDM. Method 1.On Bench PIN2&3&52 – +12V PIN4&5 – GND PIN33 –… Continue Reading
