Question: I see there is a big difference between OBDSTAR DC706 and OBDSTAR X300 Classic G3. The document from official website shows as below, the same with ECU. DC706 has plenty more options. Als, is G3 with odometer license or… Continue Reading
Question: Can’t use Launch X431 PAD VII Tablet on AC Delco TDI. Just updated SmartLink C, but the VCI won’t work, how to fix it? Here we will show you how to use Launch X431 SmartLink C J2534 function. Instruction:… Continue Reading
One customer asked if there is a protocol for Denso 4N15 MA275700-9692 on KESS3. He can’t even get an ID reading the file is just mumbojumbo almost encryption-looking. It has got to be corrupted that should be the issues. Is… Continue Reading
One customer gave feedback that his Autel AP200 Scanner pairs with his phone but does not connect to VCI. His phone works well but Android 14 fails. The AP200 app just freezes on that screen. Also tried to cancel vci… Continue Reading
Here is a review of Alientech KESS3: Alientech KESS3 Clone Peugeot Boxer 2015 DCM6.2C Success. Vehicle: Peugeot Boxer 2015 Module: Steps: Select Peugeot– Boxer II (2015)– 2.0BlueHDi 130 96– Delphi DCM6.2C. Check out BOOT mode pinout and connect KESS3.… Continue Reading
Alitentech KESS3 V1.94 now adds OBD Remap on Bosch MSE8.0 on CF Moto’s CForce range models and Zontes’ small-displacement ZT models. *All KESS3 with an active subscription will enjoy the update! New ECU: Bosch MSE8.0 Bosch MSE8.0 CF MOTO… Continue Reading
Ford after around 2015 may have systems that require BCM data to add keys. With active alarm on, key programming in 2mins is not possible. Here is a case with some important tips, Car: Ford Mustang 2015 Key: 900 MHZ… Continue Reading
One customer gave feedback that he has handled the biggest annoyance — when it comes to using OBDSTAR DC706, no wiring diagrams on the PC. Here we will show you the folders where the guides and images are located, so… Continue Reading
Which is the best ECU programmer under 1,000EUR, VVDI Multi Prog or CGDI FC200? In this article, we will show you their difference. And we will only focus on ECU and TCU difference. 1.CG FC200 PROS: ECU VAG: Simos 8.1/… Continue Reading
Quick Question: How to fix “Try frequency failed (00)” error when VVDI PROG with Xhorse MQB Adapter reads dashboard data? Tried test function and mqb option, all failed but if I solder cables using MCU cable in the package, VVDI… Continue Reading
