Question: SID309 OBD password unlock stop at 57%. Waited for 20 minutes and nothing was happening. How to make FoxFlash Software continue? Here Cardiagtool tech Answer: When reading password via OBD (IN CAR) please ensure immo system does not become… Continue Reading
V2022.12.10 KT200 Software is available now! SID310 in OBD mode is added and more updates are coming. Free Download V12.10 KT200 Software: V2022.12.10 KT200 How to Install? Unzip it into the C:\KT200-master folder and overwrite the file OS: Windows 7,… Continue Reading
Question: Possible to read SID307? I have KT200 and PCMtuner. Answer: Both work. KT200 support Dacia/Mercedes/Nissan/Renault SID307 by Boot mode; PCMtuner support Renault/ Nissan by OBD mode. 1.PCMtuner V1.27 Module 25 Renault/Nissan 1.5dCi 1.5L dCi Delphi DCM 1.2 (ST10/512KB) 1.5L… Continue Reading
One customer wondered if KT200 Programmer can read/ write PSA DCM6.2A in bank? Or can only do it in OBD Answer: On Bench/ OBD on Bench/ Jtag BDM. Method 1.On Bench PIN2&3&52 – +12V PIN4&5 – GND PIN33 –… Continue Reading
Vident iSmart800 Pro with CANFD module, is a new Vident diagnostic tool supporting 110+ cars up to the year 2023 without adapters. iSmart800 Pro VS Autel MK808: Item Vident iSmart800 pro Autel MK808 Image Software Diagnostic function Read ECU information… Continue Reading
Question: Can FoxFlash read/ write gpec2? Here Cardiagtool tech Answer: FoxFlash Software support GPEC2A, GPEC3, GPEC4, GPEC4LM but not GPEC2. Here is all supported GPEC PCM: Brand vehicle Model vehicle Engine/gear type ECU Brand ECU Type Info Micro Info EEPROM… Continue Reading
One user gave feedback that his KT200 Full License showed ERROR SET2 when reading PSA EDC16C3. Here Cardiagtool tech gave the Solution: Remove the resistor, which is built into the bench box. Same connection only the resistor is not required.… Continue Reading
This article is going to show you how to refresh X300 DP Plus system. Please talk to your seller before refreshing your device. In this case, the tablet got stuck on the starting screen, which was fixed by refreshing. … Continue Reading
The latest V1.3.0 FoxFlash Manager could support up to 6 computers, which allows you run FoxFlash software on different computers without activation. If you still don’t know how to install and activate FoxFlash, please check: Free Download FoxFlash Software… Continue Reading
One customer wonder if KT200 Tool could read calculator Sim32 Clio 3 1.2 on the table by obd with godiag cable? Answer: Test, if not work, do gateway/ immo clearance. KT200 only support SIM32 on BDM/ JTAG mode. … Continue Reading
