Alientech KESS3 V2.25 now supports ZF8HP45 TCU and Temic DL501 GEN II gearboxes. Operate in BENCH mode—no need to open the control unit—on ZF gearboxes installed in Jaguar vehicles with 2.0d and 3.0d engines, managed by the Bosch ZF8HP45 TCU.… Continue Reading
This is the latest installtion guide about how to install PADFLASH software on different Windows versions. Guide: *Windows7 64 bits system is highly recommended 1)Download software and driver Go to official website. (https//padflashr.uk) Enter Email and SN number and… Continue Reading
Flex now supports SID212 and SID212 EVO by OBD. OBD Support for Continental/Vitesco SID212 and SID212 EVO installed on Ford vehicles is now live on Flex. Supported Vehicles Ford Ranger T6 MY2021 Ford Transit MK9 MY2021 Ford Mondeo IV… Continue Reading
AutoTuner New Protocol is available! Bosch EDC17U01 and EDC17U05 ECUs are now supported in OBD for Audi, Ford, Seat, Skoda, and VW vehicles. These protocols target the 1.4 TDI and 1.9 TDI engines, widely used across the VAG group. A… Continue Reading
CG FC200 V1.2.8.0 updates SIM2K-250_ECU, SIM2K-250_TCU, SIM2K-260, SIM2K-140_ECU, SIM2K-140_TCU, SIM2K-141_ECU, and SIM2K-141_TCU. Free Download FC200 Software: V1.2.8.0 FC200 FC200 New functions: Models with the “Three readiness monitors not ready” function added: BMW: MSV90, MEVD17.2.2, MEVD17.2.8, MEVD17.2.H Hyundai/Kia: SIM2K-240,… Continue Reading
AutoTuner Update Info: We are updating our OBD protocol for Continental EMS24xx ECUs installed in Ford and Mustang vehicles. Until now, only virtual reading (VR) was available for these ECUs. This operation has now been replaced with a real reading… Continue Reading
Alientech KESS3 V2.23 now updates OBD VR Protocol for Bosch MD1CP004. Make sure KESS3 CAR LCV OBD Protocol is activated on your tools. Update Info: This update completes the existing BENCH coverage available on KESS3, offering an even more immediate… Continue Reading
Alientech KESS3 V2.22 now updates BOOT protocols for Weichai and Kubota. Update Info: Work in BOOT mode*, operating with the ECU open, on the Weichai ECU13 WISE15 units used in the 3.2L Weichai engines installed on the 2022 Dongfeng LX2004… Continue Reading
We are proud to announce the very first protocol release for your AutoTuner One. Bosch ECUs EDC17C06, EDC17C41, EDC17C50, EDC17C56, EDC17CP02, EDC17CP09, EDC17CP45, and EDC17CP49 are now supported for Alpina, BMW, and Mini vehicles, covering both E-Series and F-Series. … Continue Reading
TCU PDK3000 and PDK4000 now are added into Alientech KESS3 V2.20. Work precisely on the PDK transmission of Porsche sports models: access the Continental PDK3000 and PDK4000 TCUs via BOOT mode, read, write, and clone the ECU content with total… Continue Reading
