1.GM original software, its a powerful and comprehensive testing function to test the power system, body and car chassis
2. Car Support: all common cars 93 years later, including North America GM, China Shanghai GM, Isuzu, Saab, Opel
3. The hardware can be upgraded to ensure the equipment never out of date
4. Large screen, highlight backlight
5. With RS232 and RS485 ports, connected to a PC or other equipment
6. Storage and playback fault codes, lock data box and fault data recording
7. The GM Tech2 Could be diagnose the status of vehicle diagnostic tests during the test drive.
8. Humanize Layout, easy to operate
9. Use the 32 MB card, large capacity, easy to upgrade
10. Connect the CANdi module, the system can detect vehicles equipped with CAN Protocol
GM Tech 2 Standard configuration
1. Host Computer
2.GM32M PCMCIA card, CANdi module
3.110 volt transformer
4. Data Cable, self-test joints
5. North America 12/19 pin connector
6.OBD II connector
7. The cigarette lighter wiring
9.RS232 self-test Interface Connector
10. Operating Manual User Guide
1.GM Service Programming System TIS2000
This is another Tech2’s powerful feature that can be applied to Service Programming System 1993 after car computer Reprogramming and settings. If You want to get the job done, you need to configure your computer, Tech2 and Service Programming System CD.
TIS2000 including Security dongle, Car START CD and computer data CD. You can accomplish the following three tasks:
* To enter a new program in auto computer
* Upgrade Tech2 software
* To Upload the Tech2 data stored in the computer
2. Shanghai GM program card (standard)
3. USA General program card (Buick Royaum, Buick Park Avenue)
4. Opel software card
5. Saab software card
6. Isuzu software card
7.CAN system converter CANDI
Tech 2 diagnostic tester from the LCD screen, the four “softkeys”, standard keyboard, the vehicle communication interface module and RS-232 communication port composed by replacing the card can plug different test different models. Follow these steps:
(1) Turn on the instruments self-test, the screen “SYSTEM INITIANLIZING (system initialization)” for about 4 seconds; when the instrument emits a beep tone, the screen will display instrument version information.
(2) Press the Enter key to enter the main menu, the screen displays: F0- diagnosis, F1- service program system, F2- display captured data, F3- tool options, F4- enabled.
(3) up and down cursor keys to select the destination, and press Enter.
(4) Select the F0 function into the vehicle specification options by moving the cursor keys to select the model year. Press the Enter key to enter the vehicle system, choose the appropriate type, press the Enter key to enter the system selection menu, the screen displays: F0- engine power, F1- body, F2- chassis, F3- diagnosis? Bianfanghuluo?
(5) to move the cursor keys to select F0, press the Enter key to enter the engine type option, then choose 3.2L V6G8 or 3.1L V6L82 two models, press the Enter key to select the former directly into the following functions; the latter by back after the car keys, also select BUICK, enter, to enter the following function, the screen displays: F0- trouble code (DTC), F1- data show, F2- special features, F3- capture, F4-I / M information, F5 -ID information.
(6) to select DTC, press the Enter key to enter the diagnostic code function: F0-DTC information, F1- failed record, F2- clear DTCs, F3- capture information.
(7) to move the cursor keys to select F0, press the Enter key OK, enter the following interface: F0-DTC information, F1- Read fault codes (special DTC), after F2- clear fault codes recorded, F3- diagnostic test instructions.
(8) to move the cursor keys to select F0, press the Enter key OK, the fault code. By the cursor keys to flip; or press the corresponding key INFO, available for help.
(9) returns “7”, select F1, press the Enter key OK, enter the fault query interface, this time by entering the fault code, referred inquiries on behalf of the faults and provide helpful information.
(10) Back to “6”, select F1, press the Enter key OK, then you can display the error code.
(11) Back to “6”, select F2, press the Enter key OK, the screen prompts: really want to remove it? (Y / N), Y Press the key to clear, press N to cancel.
(12) Back to “6”, select the F3, press the Enter key to confirm, the screen displays: recapturing information is repeatedly displayed, prompting you really want to refresh (Y / N), press Y to re-capture, press the N key repeat display.
(13) to return to “5”, select F2, press the Enter key to confirm, the screen displays: engine, transmission.
More GM Tech2 Diagnostic Tool Please Refer To: http://www.worldobd2.com/wholesale/gm-tech2.html